How Much Does a Shingle Roof Cost in Florida?

A shingle roof's cost depends on your roof's size in squares, its pitch and complexity, the decking, tear-off and code items. Architectural shingle has the lowest upfront cost of the three sloped options, below tile and metal. The fastest way to see a real price is our free instant online roof quote, with a final price after a free inspection.
How shingle roof pricing works
Roofing is priced by the square: 100 square feet of roof surface. A shingle roof is quoted as a price per square, so the number of squares on your roof drives the total. Architectural shingle has the lowest price per square of the common sloped options.
The shingle we install is GAF Timberline HDZ, rated to 130 mph with a Florida installation. Architectural shingles are thicker and layered compared with the old flat three-tab style, which gives the roof more depth and texture.
Keep in mind your roof is bigger than your house's footprint. Slope, overhangs and cutting waste all add area. Our explainer on what a roofing square is shows the math.
How to estimate your roof's size: a 2,000 sq ft home
You can estimate your roof's squares on paper. Here's a typical one-story home in Greenacres or Lake Worth Beach with a 2,000 sq ft footprint, a standard pitch and a simple roof:
- Start with the footprint under the roof: 2,000 sq ft, including the garage and covered patios.
- Multiply by the pitch factor for a standard slope: 2,000 × 1.15 = 2,300 sq ft of roof surface.
- Add 12% waste for a simple roof: 2,300 × 1.12 = about 2,576 sq ft.
- Divide by 100: about 25.8 squares.
A steeper pitch or more hips and valleys raise the count, and a two-story home costs a bit more because access is harder. Once you know the squares, the price is that count times the price per square for the material you pick, plus anything the inspection turns up.
On the same house, shingle is the lowest upfront cost of the three for a sloped roof, with concrete tile in the middle and standing seam metal the highest. To see the actual shingle price for your own home, use our instant online roof quote.
What changes the price
- Roof shape. More hips and valleys mean more cutting. Waste runs about 12% for simple roofs, 15% for moderate and 22% for complex.
- Pitch. A steep roof has more area and needs more safety setup.
- Decking. Soft or rotten plywood shows up only at tear-off. It's typically priced per sheet as an extra.
- Code requirements. Florida code requires re-nailing the deck and a secondary water barrier on many reroofs.
- Access. Two stories, tight side yards and pool cages slow the crew down.
When you're comparing bids, make sure each one includes tear-off, the same shingle line, the same underlayment and a clear decking price per sheet.
What a shingle replacement should include
A shingle quote is only useful if you know what's in it. On a full replacement in South Florida, expect the job to cover these steps:
- Permit. Every roof replacement in Florida needs a building permit, and the licensed roofing contractor normally pulls it.
- Tear-off. The old roof comes off down to the deck so the crew can see what's underneath.
- Deck repair and re-nailing. Bad boards are replaced, and Florida code requires re-nailing the deck to current standards on many reroofs.
- Secondary water barrier and underlayment. This is the layer that keeps water out if shingles are lost in a storm.
- Flashing, vents and edge metal. These details are where most leaks start, so they should be new.
- Inspections. The city inspects during the job, such as at dry-in, and again at the end.
If a quote is much lower than the others, check which of these it leaves out. Our post on what happens during a roof replacement walks through the job day by day.
How long shingles last in South Florida
Architectural shingles typically last 25–30 years here, and often less on the coast or on a house with poor attic ventilation. Sun, heat, humidity and salt air are harder on asphalt shingles than on tile or metal.
That shorter life matters for insurance too. Florida law says an insurer can't refuse to issue or renew a policy solely because a roof is under 15 years old. Once a roof is 15 or older, the insurer must let you get an inspection, at your expense, before it can require a replacement, and insurance experts say premiums generally rise after that point. For a shingle roof, 15 years arrives while it may still have useful life left.
Shingle, tile or metal?
Shingle makes sense when the budget is tight, when you plan to sell within a decade or so, or when the house was built for shingles. Tile (40–50 years) and metal (40–60 years) cost more up front but last longer. Our comparison of tile versus shingle roofs in Palm Beach County goes through the trade-offs.
In Broward and Miami-Dade, the High-Velocity Hurricane Zone requires HVHZ-approved products, such as those with a Miami-Dade Notice of Acceptance. Palm Beach County isn't HVHZ but still requires Florida-approved products and a wind-rated install. Shingle roofs are common and fully permitted in both.
Getting your price
At 1 OAK we replace shingle roofs across Palm Beach and Broward, including shingle roof replacement in Wellington. Our instant online roof quote measures your roof from satellite imagery and shows a real price for your home in a couple of minutes. A free inspection then confirms everything before you get a written quote. We also offer $0-down financing with up to 2 years before the first payment. Subject to approval; terms may vary.
Frequently asked questions
Can I put new shingles over my old ones in Florida?
Usually not. Florida code's base rule is to remove existing layers before installing a new roof, and a tear-off is required if there are already two or more layers or the old roof is deteriorated or water-soaked. Insurers and wind uplift requirements make full tear-offs the norm. See can you put a new roof over an old roof in Florida.
Are three-tab shingles cheaper?
Three-tab shingles cost less up front, but we install architectural shingles. The line we use is rated to 130 mph with a Florida installation, and that's what we recommend for South Florida homes.
How much does a shingle roof cost for a 1,500 sq ft house?
It depends on the pitch and shape, not just the footprint. Multiply the footprint by a pitch factor (1.15 for a standard pitch), add waste (12% for a simple roof) and divide by 100. With a standard pitch and a simple roof, that's about 19.3 squares. For the actual price on your home, our instant roof quote measures your roof from satellite imagery, and a free inspection sets the final number.
Is decking replacement included?
Decking damage can't be seen until the old roof comes off, so most quotes price it per sheet as an extra. Ask every contractor for their per-sheet price in writing.


