How Much Does a Metal Roof Cost in Florida?

A metal roof's cost depends on roof size in squares, its pitch and complexity, the decking, tear-off and code items. Standing seam metal has the highest upfront cost of the three sloped options, above tile and shingle. The fastest way to see a real price is the free instant online roof quote, with the final price after a free inspection.
How metal roof pricing works
Roofs are priced by the square, which is 100 square feet of roof surface. A metal roof is quoted as a price per square, so the size of your roof drives the total. Standing seam metal has the highest price per square of the common sloped options, above concrete tile and architectural shingle.
The system we install is 24-gauge standing seam with concealed fasteners. The panels lock together at raised seams, and the screws are hidden under the panel rather than driven through the face of it. That's the system we install for homes in South Florida, and it's what our quotes are based on.
Remember the square footage is the roof, not the house. Slope, overhangs and waste make a roof bigger than its footprint. Our post on how roofing squares work shows how to estimate yours.
How to estimate your roof's size: a 2,000 sq ft home
You can estimate your squares with a pencil. Take a one-story home with a 2,000 sq ft footprint, a standard pitch and a simple roof, like a lot of homes in Jupiter or Royal Palm Beach:
- Start with the footprint under the roof: 2,000 sq ft, including the garage and covered patios.
- Multiply by the pitch factor for a standard slope: 2,000 × 1.15 = 2,300 sq ft of roof surface.
- Add 12% waste for a simple roof: 2,300 × 1.12 = about 2,576 sq ft.
- Divide by 100: about 25.8 squares.
A steeper pitch or a more cut-up roof raises the count, and a two-story home costs a bit more because access is harder. Once you know the squares, the price is that count times the price per square for the material you pick, plus anything the inspection turns up.
On the same house, metal costs the most up front, tile less and architectural shingle the least. Whether metal is the best value depends on how long you'll own the home and what matters most to you. To see the actual metal price for your own roof, use our instant online roof quote.
What moves the price
- Roof complexity. Every hip, valley and wall meeting means more cutting and custom trim. Waste runs about 12% on simple roofs, 15% on moderate and 22% on complex ones.
- Pitch. Steeper roofs have more area and take longer to work on safely.
- Decking. Damaged plywood or OSB only shows up at tear-off and is usually priced per sheet.
- Code items. Florida code requires re-nailing the deck and a secondary water barrier on many reroofs.
- Height and access. Two stories, landscaping and pool enclosures all add time.
When quotes for metal are far apart, check whether they're quoting the same gauge, the same fastener system and the same underlayment.
Lifespan: where metal earns its price
South Florida is hard on roofs. Strong sun, heat, humidity, salt air near the coast and hurricanes all shorten roof life compared with national averages. Even so, a standing seam metal roof typically lasts 40–60 years here. That's longer than tile (40–50) and much longer than architectural shingle (25–30).
If you're likely to stay in the house for decades, a metal roof may be the last roof you buy. If you're planning to sell in a few years, you may not get the full value of that lifespan. Our post on metal roofs for hurricane zones in Florida goes deeper on performance.
Will a metal roof lower my insurance?
Not automatically, and anyone who promises otherwise is overselling. Industry experts point out that a new metal roof doesn't by itself lower premiums.
What can help is a wind mitigation inspection after the new roof goes on. It uses the state's OIR-B1-1802 form to document things like roof covering, deck attachment, roof-to-wall connections and secondary water resistance. Florida insurers must offer discounts for qualifying features, but the size varies by insurer. A new roof installed to current code often improves several items on the form, whatever the material.
Metal roofs in Broward versus Palm Beach
Broward and Miami-Dade are in the High-Velocity Hurricane Zone. Metal panels there need HVHZ product approval, such as a Miami-Dade Notice of Acceptance, and Broward uses a uniform HVHZ roofing permit with staged inspections. Palm Beach County isn't HVHZ but still requires Florida-approved products and a wind-rated install. Either way, the contractor pulls the permit and the city inspects the work along the way.
At 1 OAK we install metal across both counties, from roof replacement in Fort Lauderdale to Palm Beach Gardens. You can see color options on our roof colors page.
Getting a real number
Our instant roof quote measures your roof from satellite imagery and gives you a metal price for your own home in a couple of minutes. A free inspection then confirms the measurements and conditions before you get a written quote. We also offer $0-down financing with up to 2 years before the first payment. Subject to approval; terms may vary.
Frequently asked questions
Can a metal roof go over my existing shingles?
Florida code generally requires removing the old roof first. A complete standing seam system that doesn't rely on the old roof for support can be an exception in some cases. In Broward and Miami-Dade, HVHZ rules are stricter, and roof-overs are rarely an option. Your contractor and permit office will confirm, but full tear-offs are the norm in Florida.
Is metal better than tile for hurricanes?
Both can perform well when installed to Florida code with approved products. The installation, the deck attachment and the underlayment matter as much as the covering. See what is the best roof for hurricanes for a fuller comparison.
Why do metal roof quotes vary so much?
Contractors may be quoting different panel gauges, exposed versus concealed fasteners, different underlayments or different trim details. Ask each one to spell out the system in writing so you're comparing the same thing.
How long does a metal roof last in South Florida?
A standing seam metal roof typically lasts 40–60 years here. Coastal salt air, maintenance and installation quality all affect where in that range yours ends up.


